Laboratoire Léon Brillouin

UMR12 CEA-CNRS, Bât. 563 CEA Saclay

91191 Gif sur Yvette Cedex, France


BD diffusons les neutrons

Faits marquants scientifiques 2023

22 décembre 2023

V. Balédent, A. Vaunat, S. Petit, L. Nataf, S. Chattopadhyay, S. Raymond, and P. Foury-Leylekian

In this paper, we investigate the physical properties of the type-II multiferroic GdMn2O5 material by means of neutron scattering, electric polarization, and magnetization measurements. A complex (T,H) phase diagram shows up, with especially a field-induced magnetic transition around 11 T at low temperature. The high-field phase is accompanied by an additional electric polarization along both the a and b directions, as authorized by symmetry, but never observed experimentally up to now. While the magnetic properties recover their initial states after driving the field back to zero, the polarization along a shows a significant increase. This behavior is observed for all directions of the magnetic field. It constitutes a novel and striking manifestation of the magnetoelectric coupling, resulting in the establishment of a new ground state at zero magnetic field.

01 décembre 2023

Anne-Charlotte Le Gulluche, Guylaine Ducouret, Ludovic Olanier, Annie Brûlet, Olivier Sanseau, Paul Sotta, and Alba Marcellan

Model hybrid hydrogels reinforced by silica nanoparticles were designed by polymerizing and cross-linking the gels in situ. The polymer–particle interactions were tuned by using either poly(dimethylacrylamide) (PDMA), which adsorbs on silica, or poly(acrylamide) (PAAm), which does not. Besides, the dispersion state of silica nanoparticles was tuned from well-dispersed to aggregated by changing the pH from 9, which ensures repulsive interactions between nanoparticles and good dispersion state, to about 6, which affects the surface chemistry of silica and promotes aggregation. The dispersion states were characterized by small-angle X-ray scattering (SAXS). The mechanical behavior of hybrid gels with aggregated nanoparticles is markedly different from those where silica is well-dispersed within the matrix. PDMA-based hybrid gels display pronounced nonlinear behavior, somehow similar to those observed in filled elastomers. The nonlinearities are even more pronounced in gels with aggregated particles, with strong strain stiffening along with large dissipation. For those samples, reinforcement can be attributed to the combination of both reversible interactions between PDMA and silica nanoparticles, which provide strain stiffening and recovery, and the response of the silica network. Recovery processes observed in hybrid gels with dispersed particles are preserved when silica particles are aggregated, but the characteristic time needed to fully recover the mechanical response is extended from a few seconds to several hours. In PAAm-based hybrid gels with aggregated silica nanoparticles, no recovery processes are observed. This implies that the properties, namely, the very high linear tensile modulus and high dissipated energy, are driven by the rigid network formed by nanoparticle aggregation, which provides high dissipative capabilities, especially when compared to PAAm-based hybrid gels with dispersed silica, that remain soft and fragile. These gels exhibit a quite inhomogeneous structure, with permanent damage under elongation. The nonlinear dynamical behavior of hybrid gels was investigated by large amplitude oscillatory shear (LAOS) experiments. While unfilled gels show no nonlinearity up to very large strain amplitude, marked nonlinear effects combining a drop in modulus (similar to the Payne effect) and strain stiffening for increasing strain amplitude are observed in PDMA-based hybrid gels, certainly due to polymer adsorption onto nanoparticles. PAAm-based hybrid gels also show nonlinearity, with a drop in modulus for increasing strain but no strain stiffening, indicating that the presence of fillers alone can induce nonlinearity in the absence of strong, reversible polymer–particle interactions. PAAm-based hybrid gels with aggregated silica show very high stiffness and high dissipative properties at the expense of stretchability, though. Also, the structure seems to be permanently damaged under stress, revealing the importance of silica–polymer interactions for permanent mechanical reinforcement. Altogether, the analysis of the nonlinear behavior indicates the importance of combining dynamic adsorption of polymer chains on silica nanoparticles with mechanical reinforcement provided by the silica network.



08 novembre 2023

A. Sazonov, H. Thoma, R. Dutta, M. Meven, A. Gukasov, R. Fittipaldi, V. Granata, T. Masuda, B. Nafradi, and V. Hutanu

A detailed investigation of Ba2MnGe2O7 was performed in its low-temperature magnetoelectric state combining neutron diffraction with magnetization measurements on single crystals. In the paramagnetic state at 10 K, polarized neutron diffraction was applied to reveal the components of the susceptibility tensor. The crystal and magnetic structures below the antiferromagnetic transition temperature of TN≈4K were determined using unpolarized neutron diffraction. These data imply no structural phase transition from 10 K down to 2.5 K and are well described within the tetragonal space group P¯421m. We found that in zero magnetic field the magnetic space group is either Ccmc21 or Pc212121 with antiferromagnetic order along the [110] or [100] direction, respectively, while neighboring spins along the [001] axis are ordered antiferromagnetically. A noncollinear spin arrangement due to small canting within the ab plane is allowed by symmetry and observed experimentally. The ordered moment is found to be 3.24(3) μB/Mn2+ at 2.5 K and the temperature-field dependent magnetic phase diagram is mapped out by macroscopic magnetization. Distinct differences between the magnetic structure of Ba2MnGe2O7 as compared to those of Ba2CoGe2O7 and Ca2CoSi2O7 are discussed.

21 septembre 2023

Ellen Fogh, Bastian Klemke, Manfred Reehuis, Philippe Bourges, Christof Niedermayer, Sonja Holm-Dahlin, Oksana Zaharko, Jürg Schefer, Andreas B. Kristensen, Michael K. Sørensen, Sebastian Paeckel, Kasper S. Pedersen, Rasmus E. Hansen, Alexandre Pages, Kimmie K. Moerner, Giulia Meucci, Jian-Rui Soh, Alessandro Bombardi, David Vaknin, Henrik. M. Rønnow, Olav F. Syljuåsen, Niels B. Christensen and Rasmus Toft-Petersen

Control of magnetization and electric polarization is attractive in relation to tailoring materials for data storage and devices such as sensors or antennae. In magnetoelectric materials, these degrees of freedom are closely coupled, allowing polarization to be controlled by a magnetic field, and magnetization by an electric field, but the magnitude of the effect remains a challenge in the case of single-phase magnetoelectrics for applications. We demonstrate that the magnetoelectric properties of the mixed-anisotropy antiferromagnet LiNi1−xFexPO4 are profoundly affected by partial substitution of Ni2+ ions with Fe2+ on the transition metal site. This introduces random site-dependent single-ion anisotropy energies and causes a lowering of the magnetic symmetry of the system. In turn, magnetoelectric couplings that are symmetry-forbidden in the parent compounds, LiNiPO4 and LiFePO4, are unlocked and the dominant coupling is enhanced by almost two orders of magnitude. Our results demonstrate the potential of mixed-anisotropy magnets for tuning magnetoelectric properties.

25 août 2023

Maëva Almeida, Daniel Dudzinski, Catherine Amiel, Jean-Michel Guigner,Sylvain Prévost, Clémence Le Coeur and Fabrice Cousin

Here, we describe the behavior of mixtures of stearic acid (SA) and its hydroxylated counterpart 12-hydroxystearic acid (12-HSA) in aqueous mixtures at room temperature as a function of the 12-HSA/SA mole ratio R. The morphologies of the self-assembled aggregates are obtained through a multi-structural approach that combines confocal and cryo-TEM microscopies with small-angle neutron scattering (SANS) and wide-angle X-ray scattering (WAXS) measurements, coupled with rheology measurements. Fatty acids are solubilized by an excess of ethanolamine counterions, so that their heads are negatively charged. A clear trend towards partitioning between the two types of fatty acids is observed, presumably driven by the favorable formation of a H-bond network between hydroxyl OH function on the 12th carbon. For all R, the self-assembled structures are locally lamellar, with bilayers composed of crystallized and strongly interdigitated fatty acids. At high R, multilamellar tubes are formed. The doping via a low amount of SA molecules slightly modifies the dimensions of the tubes and decreases the bilayer rigidity. The solutions have a gel-like behavior. At intermediate R, tubes coexist in solution with helical ribbons. At low R, local partitioning also occurs, and the architecture of the self-assemblies associates the two morphologies of the pure fatty acids systems: they are faceted objects with planar domains enriched in SA molecules, capped with curved domains enriched in 12-HSA molecules. The rigidity of the bilayers is strongly increased, as well their storage modulus. The solutions remain, however, viscous fluids in this regime.

30 juillet 2023

I. V. Golosovsky, I. A. Kibalin, A. Gukasov, A. G. Roca, A. López-Ortega, M. Estrader, M. Vasilakaki, K. N. Trohidou, T. C. Hansen, I. Puente-Orench, E. Lelièvre-Berna, J. Nogués

Heterogeneous bi-magnetic nanostructured systems have had a sustained interest during the last decades owing to their unique magnetic properties and the wide range of derived potential applications. However, elucidating the details of their magnetic properties can be rather complex. Here, a comprehensive study of Fe3O4/Mn3O4 core/shell nanoparticles using polarized neutron powder diffraction, which allows disentangling the magnetic contributions of each of the components, is presented. The results show that while at low fields the Fe3O4 and Mn3O4 magnetic moments averaged over the unit cell are antiferromagnetically coupled, at high fields, they orient parallel to each other. This magnetic reorientation of the Mn3O4 shell moments is associated with a gradual evolution with the applied field of the local magnetic susceptibility from anisotropic to isotropic. Additionally, the magnetic coherence length of the Fe3O4 cores shows some unusual field dependence due to the competition between the antiferromagnetic interface interaction and the Zeeman energies. The results demonstrate the great potential of the quantitative analysis of polarized neutron powder diffraction for the study of complex multiphase magnetic materials.


06 juillet 2023

Simeon Minic, Burkhard Annighöfer, Milos Milcic, François Maignen, Annie Brûlet, Sophie Combet

Apomyoglobin (apoMb), a model protein in biochemistry, exhibits a strong propensity to bind various ligands, which makes it a good candidate as a carrier of bioactive hydrophobic drugs. The stability of its hydrophobic pocket determines its potential as a carrier of bioactive compounds. High pressure (HP) is a potent tool for studying protein stability, revealing the specific role of hydrophobic cavities in unfolding. We probed the effects of biliverdin (BV) binding and its complex with Zn2+ ions on the structure and HP stability of apoMb. CD spectroscopy and SAXS measurements revealed that BV and BV-Zn2+ complexes make the apoMb structure more compact with higher α-helical content. We performed in situ HP measurements of apoMb intrinsic fluorescence to demonstrate the ability of BV to stabilise apoMb structure at HP conditions. Furthermore, the presence of Zn2+ within the apoMb-BV complex significantly enhances the BV stabilisation effect. In situ visible absorption study of BV chromophore confirmed the ability of Zn2+ to increase the stability of apoMb-BV complex under HP: the onset of complex dissociation is shifted by ∼100 MPa in presence of Zn2+. By combining HP-fluorescence and HP-visible absorption spectroscopy, our strategy highlights the crucial role of tetrapyrrole-metal complexes in stabilising apoMb hydrophobic pocket.

13 juin 2023

Somia Haouache, Yu Chen, Clara Jimenez-Saelices, Fabrice Cousin, Pan Chen, Yoshiharu Nishiyama, François Jerome, and Isabelle Capron

Nanocelluloses can be used to stabilize oil–water surfaces, forming so-called Pickering emulsions. In this work, we compare the organization of native and mercerized cellulose nanocrystals (CNC-I and CNC-II) adsorbed on the surface of hexadecane droplets dispersed in water at different CNC concentrations. Both types of CNCs have an elongated particle morphology and form a layer strongly adsorbed at the interface. However, while the layer thickness formed with CNC-I is independent of the concentration at 7 nm, CNC-II forms a layer ranging from 9 to 14 nm thick with increasing concentration, as determined using small-angle neutron scattering with contrast-matched experiments. Molecular dynamics (MD) simulations showed a preferred interacting crystallographic plane for both crystalline allomorphs that exposes the CH groups (100 and 010) and is therefore considered hydrophobic. Furthermore, this study suggests that whatever the allomorph, the migration of CNCs to the oil–water interface is spontaneous and irreversible and is driven by both enthalpic and entropic processes.


23 mai 2023

Özge Azeri, Dennis Schönfeld, Bin Dai, Uwe Keiderling, Laurence Noirez and Michael Gradzielski

Block copolymers synthesized via Atom Transfer Radical Polymerization from alkyl acrylate and t-butyl acrylate and the subsequent hydrolysis of the t-butyl acrylate to acrylic acid were systematically varied with respect to their hydrophobic part by the variation in the alkyl chain length and the degree of polymerisation in this block. Depending on the architecture of the hydrophobic part, they had a more or less pronounced tendency to form copolymer micelles in an aqueous solution. They were employed for the preparation of IPECs by mixing the copolymer aggregates with the polycations polydiallyldimethylammonium chloride (PDADMAC) or q-chit. The IPEC structure as a function of the composition was investigated by Static Light and Small Angle Neutron Scattering. For weakly-associated block copolymers (short alkyl chain), complexation with polycation led to the formation of globular complexes, while already existing micelles (long alkyl chain) grew further in mass. In general, aggregates became larger upon the addition of further polycation, but this growth was much more pronounced for PDADMAC compared to q-chit, thereby leading to the formation of clusters of aggregates. Accordingly, the structure of such IPECs with a hydrophobic block depended largely on the type of complexing polyelectrolyte, which allowed for controlling the structural organisation via the molecular architecture of the two oppositely charged polyelectrolytes.

02 mai 2023

Céline JAUDOIN, Isabelle GRILLO, Fabrice COUSIN, Maria GEHRKE, Malika OULDALI, Ana-Andreea ARTENI, Luc PICTON, Christophe RIHOUEY, Fanny SIMELIERE, Amélie BOCHOT, Florence AGNELY

Mixtures of hyaluronic acid (HA) with liposomes lead to hybrid colloid–polymer systems with a great interest in drug delivery. However, little is known about their microstructure. Small angle neutron scattering (SANS) is a valuable tool to characterize these systems in the semi-dilute entangled regime (1.5% HA) at high liposome concentration (80 mM lipids). The objective was to elucidate the influence of liposome surface (neutral, cationic, anionic or anionic PEGylated), drug encapsulation and HA concentration in a buffer mimicking biological fluids (37 °C). First, liposomes were characterized by SANS, cryo-electron microscopy, and dynamic light scattering and HA by SANS, size exclusion chromatography, and rheology. Secondly, HA-liposome mixtures were studied by SANS. In HA, liposomes kept their integrity. Anionic and PEGylated liposomes were in close contact within dense clusters with an amorphous organization. The center-to-center distance between liposomes corresponded to twice their diameter. A depletion mechanism could explain these findings. Encapsulation of a corticoid did not modify this organization. Cationic liposomes formed less dense aggregates and were better dispersed due to their complexation with HA. Liposome surface governed the interactions and microstructure of these hybrid systems.


08 avril 2023

Anne-Sophie Robbes, Jacques Jestin, Florian Meneau, Florent Dalmas, François Boué, and Fabrice Cousin,
Macromolecules 2022, 55, 15, 6876–6889.

We present a combined detailed monitoring of the respective evolutions of the structure of fillers by SAXS and conformation of polymeric chains by SANS under uniaxial stretching at various elongation ratios in a nanocomposite made of spherical magnetic nanoparticles of γFe2O3 dispersed in a matrix of polystyrene (PS) chains. We can make the structure of fillers in the nanocomposite before stretching very anisotropic, as we demonstrated in reference (Macromolecules,2011,44(22), 8858–8865), thanks to the appliance of a magnetic field during the nanocomposite processing that induces the formation of nanoparticle chains aligned along the direction of the field, either parallel or perpendicular to the subsequent stretching. This gives rise to very anisotropic mechanical properties, and the structure of fillers evolves very differently. In the parallel case, there is a rupture of the chains of nanoparticles into smaller subunits that progressively align completely in the stretching direction. In the perpendicular case, the chains first rotate, to eventually reorient along the stretching direction, gradually breaking themselves. Finally, at a very large elongation rate (λ = 6), the organization of nanoparticles in both cases converge toward a common structure made of small chains of nanoparticles completely oriented along the stretching. The chain conformation is directly obtained by SANS as we probed samples containing 25% PSH/75% PSD chains, taking benefit from the fact that the neutron scattering length density of PSD is similar to the one of γFe2O3. Strikingly, the deformation of the polymer chains is the same as in the reference PS matrix without fillers, whatever stretching is parallel and perpendicular to the chains of nanoparticles at λ = 3. The chains scattering exhibit the typical features of those of the former studies of relaxation during or after stretching on pure melts, accounting for the relatively slow deformation rate, the distance from Tg (15 °C) their average masses, and their large polydispersity.

27 janvier 2023

Sophie Combet, Françoise Bonneté, Stéphanie Finet, Alexandre Pozza, Christelle Saade, Anne Martel, Alexandros Koutsioubas, Jean-Jacques Lacapère, Biochimie (2022) in press.

The translocator protein (TSPO) is a ubiquitous transmembrane protein of great pharmacological interest thanks to its high affinity to many drug ligands. The only high-resolution 3D-structure known for mammalian TSPO was obtained by NMR for the mouse mTSPO in DPC detergent only in presence of the high-affinity PK 11195 ligand. An atomic structure of free-ligand mTSPO is still missing to better understand the interaction of ligands with mTSPO and their effects on the protein conformation.

25 janvier 2023

Les alliages à "haute entropie" forment une nouvelle classe de matériaux cristallins, qui se caractérise par des variations aléatoires dans la composition chimique de chaque maille, sans altérer l’ordre géométrique à longue distance. Constitués d'un mélange de type "solution solide" d'au moins 4 métaux, ces matériaux au désordre partiel (chimique) possèdent des propriétés thermiques qui relèvent à la fois des cristaux, avec des modes de vibrations thermiques (phonons) bien définis, et des verres, avec une longueur de propagation de ces phonons bien plus courte que celles des cristaux.

Ces cristaux chimiquement désordonnés présentent ainsi une faible conductivité thermique, qui pourrait être exploitée en thermoélectricité (conversion directe de chaleur en électricité par effet Seebeck).


Retour en haut